-
-
Products
-
-
Blog
Open The Ideal Door To A Clean Area
How are clean windows made?
Clean window is a kind of auxiliary equipment of clean room, clean window is mainly used for the transfer of small objects between clean area and clean area, clean area and non clean area, in order to reduce the number of clean room door, reduce the pollution degree of clean room.
2021-12-02
Clean window is a kind of auxiliary equipment of clean room, clean window is mainly used for the transfer of small objects between clean area and clean area, clean area and non clean area, in order to reduce the number of clean room door, reduce the pollution degree of clean room.
The traditional clean window needs ultraviolet lamp for disinfection, but the ultraviolet lamp is fixed on the top of the sampling vehicle, and the disinfection ability of different internal positions is different, which is easy to cause bacterial leakage. Clean window and clean air transport mainly rely on fixed air outlet, affecting the purification function.
Clean window technology to achieve the elements:
In order to solve the above problems, the utility model provides a clean and clean window. By designing an angle-adjustable ultraviolet lamp and a rolling air outlet, the space of the sampling vehicle is disinfected and rolling air is provided to ensure the cleanliness of the sampling vehicle.
In order to achieve the above purpose, the utility model adopts the following technical scheme, a clean window, including the form, the form is stainless steel shell, the inside is stainless steel plate, the bottom is a relay station, the front and rear ports to the top cover are air diffusers, and the mobile glass door is connected to the sliding grooves on both sides of the window; the top of the window is provided with an air inlet, and an air supply device is connected under the air inlet. The air supply device is connected to the filter. The air is sucked in by the centrifugal fan system, and the air from the clean window is sent to the window through the primary effect and the filter, and the pressure output is uniform. The front end of the filter 5 is a rotating air outlet belt, which is divided into a rotating air outlet housing and a rotating part. The shell of the air outlet belt is fixedly connected with the four sides of the filter, and the rotating part is provided with a plurality of air outlet rods. The rotating air outlet belt and the horizontal plane are angled towards the unclean area, and the motor is located outside the center of the rotating part. The ultraviolet germicidal lamp and the lighting lamp are installed under the wind belt shell. The installation of the ultraviolet germicidal lamp and the lighting lamp is divided into two parts, with a bracket and an angle adjusting rod. The bracket and the angle adjusting rod are fixedly connected to the outer germicidal lamp and the two ends of the lighting lamp through a buckle. The bracket is installed on one side of the hinge, and the angle adjusting rod is a hydraulic rod on the other side. The two electric switch buttons are connected in parallel, it is connected in series with blower set, filter, rotating wind belt, ultraviolet germicidal lamp and light switch. When any door is opened, the switch can be touched to realize the opening of blower set, filter, rotating wind belt, ultraviolet germicidal lamp and light.
The utility model has the following advantages:
1. The working area is made of stainless steel plate, which is smooth and smooth, and the inner corner is a circular arc transition.
2. The doors on both sides of the conversion window have the interconnection function of fan start, so that the opening of any door can automatically supply air.
3. Lighting and ultraviolet germicidal lamps should be used synchronously with the start of the fan.
4. The angle-adjustable ultraviolet lamp and rolling air outlet are used to carry out rolling disinfection and air supply in the sampling vehicle space to ensure the cleanliness of the sampling vehicle.
Next:
